65 Search Results

High-voltage spinel LiNi_0.5Mn_1.5O₄ (LNMO) has attracted considerable attention as a cathode material for next-generation lithium-ion batteries due to its high operating voltage and intrinsically fast lithium-ion diffusion kinetics. However, the practical implementation of LNMO remains limited by its rapid capacity decay, primarily associated with bulk structural instability and parasitic interfacial reactions. To address these issues, we innovatively introduced calcium (Ca) as a dopant to enhance both the oxygen framework and surface stabilities of the LNMO crystal through gradient doping. Observations from the electronic microscopies, X-ray diffraction, and the elemental analysis confirmed that Ca is preferentially enriched at the particle surface,more » and a disordered crystal phase is preserved in the bulk in the gradient-doped LNMO cathodes. As cathodes in LIBs, the Ca gradient-doped (Ca gr) LNMO materials delivered formation capacities of ∼126−130 mAh/g and exhibited Coulombic efficiencies of 88−95%, which are consistently higher than those of the uniform-doped samples at the same doping level and undoped sample. Especially, the Ca gr 0.05 LNMO cathode demonstrated significantly improved rate capability with ∼113 mAh/g preserved at 10 C, while ∼92 mAh/g and ∼110 mAh/g for undoped and Ca uniform 0.05 LNMO, respectively, and excellent cycling stability, retaining ∼124.1 mAh/g (∼96.3% capacity retention) after 500 cycles. The analysis of cyclic voltammetry, differential capacity, and electrochemical impedance revealed that the excellent electrochemical performance is attributed to the structural and morphological advantages of gradient-doped LNMO cathodes with a disordered bulk structure for fast Li⁺ diffusion and a Ca-enriched surface for minimizing the Mn dissolution.« less

With the promises of low cost, high operating voltage, and excellent rate capability, the high-voltage spinel material with the formula of LiNi_0.5Mn_1.5O₄ (LNMO) has been considered as one of the most promising cathode materials for nextgeneration lithium-ion batteries (LIBs). However, the adoption of LNMO into practical LIBs is greatly hindered due to its rapid capacity decay associated with its bulk structural instability and interfacial side reactions. To address these issues, we proposed to use the cost-effective calcium (Ca) element as a dopant to stabilize the oxygen framework and surface of the LNMO crystal. The experimental results showed that, with moderatemore » Ca doping, the obtained cathode (Ca 0.05 LNMO) retained a specific capacity of ∼121 mAh/g (∼94.4% capacity retention) after 500 cycles at 0.5 C, compared to ∼73% for the baseline bare sample. Furthermore, the Ca 0.05 LNMO cathode retained ∼84% of its initial capacity, vs the baseline with ∼69%, after 150 cycles at the high temperature of 55 °C. The excellent battery performance of the moderately Ca-doped LNMO cathode is ascribed to its structural and kinetic advantages.« less

Flooding-induced oxygen deprivation (anoxia) is a challenge to plant survival, necessitating adaptive mechanisms for recovery. This study investigated elemental redistribution during anoxia recovery using time-series elemental imaging to show changes in nutrient distribution. Focusing on the role of Cation/H⁺ Exchangers (CAXs) in Arabidopsis thaliana, we show how mutants deficient in specific CAX transporters (cax1 and the cax1-4 quadruple mutant) respond to anoxia and metal stress. Mutants showed reduced lipid peroxidation and increased expression of flood-tolerance proteins during recovery. X-ray fluorescence microscopy and laser ablation–inductively coupled plasma mass spectrometry were used to show elemental redistribution over time. In wild-type plants (Col-0),more » post-anoxia elemental distribution resembled the elemental distribution of CAX mutants under normoxic conditions, suggesting that CAX-mediated elemental distribution before anoxia enables faster recovery post-anoxia, rather than affecting remobilization post-anoxia. Although CAX mutants had altered tolerance to excess manganese and copper, leaf metal distribution during metal stress was not altered. Here, these findings introduce the potential utility of time-series elemental imaging to show stress-response phenotypes and the importance of elemental distribution to recovery after anoxia. The novelty of this work lies in resolving spatial distribution patterns in a non-static system to gain insight into mechanisms of stress resilience in plants.« less

Simultaneous critical element recovery and ex-situ carbon mineralization of low-grade ultramafic deposits have garnered increasing interest. Understanding the selectivity of metal complexing organic ligands for various divalent metals present in ultramafic rocks during carbonate mineralization is required to optimize this process. Here we evaluate 2-amino-2-(hydroxymethyl)-1,3-propanediol (i.e., Tris) as a model for bidentate ligands that bind divalent metals with both amine and alcohol groups in alkaline conditions (pH 8–10.5) at 25 °C and 80 °C in carbonate-buffered solutions. Protonated Tris forms a stronger complex with metal ions and is selective for trace metals with Ni(II) > Co(II) > Fe(II) during carbonatemore » precipitation, with the rates decreasing but selectivity increasing at lower temperature and lower pH. At 25 °C, metastable amorphous hydrated carbonates form, regardless of the amount of Tris present or pH values. At 80 °C and pH 8, the Co and Fe carbonates that form are a mixture of rosasite-group minerals (Co₂CO₃(OH)₂(H₂O) and Fe₂CO₃(OH)₂) and pure carbonates (sphaerocobaltite: CoCO₃ and siderite: FeCO₃), with the latter more stabilized with increasing Tris concentration. In mixed metal solutions without Tris at 25 °C where Fe:Ni or Fe:Co is 2:1, Fe increases the rates of Ni or Co carbonate precipitation. However, with increasing Tris concentration the presence of Ni or Co inhibits Fe carbonate precipitation. At 80 °C without Tris, Ni or Co substitute into the iron chukanovite (Fe₂CO₃(OH)₂) lattice, increasing Ni or Co carbonate precipitation rates. Increasing Tris concentration only slightly inhibits Fe and Co precipitation, but slows Ni precipitation up to 10 times, with Fe progressively partitioning into more pure carbonate phases with distinct crystalline morphologies. These findings suggest bidentate amine-bearing ligands may be effective at Ni and Co recovery during carbon mineralization of Fe-bearing ultramafic deposits at relatively low temperatures and slightly alkaline pH.« less

Cerium(III) carbonate is a precursor material for the synthesis of various Ce-containing compounds. In this work, a synchrotron powder X-ray diffraction study of commercially obtained ‘cerium(III) carbonate hydrate' indicates that multiple Ce-containing phases are present. The majority phase CeCO₃OH (52.49%_wt) was refined using an ortho­rhom­bic Pmcn structure model with a = 5.01019 (2) Å, b = 8.55011 (4) Å and c = 7.31940 (4) Å, which is based on a reported structure for the lanthanoid carbonate mineral ancylite. Additionally, a substantial portion of the precursor material is cubic cerium(IV) oxide (47.12%_wt).

Rare earth element exploration requires a quantitative understanding of factors governing their mobilization and economic concentration. However, the behavior of rare earth elements in carbonate- bearing hydrothermal fluids associated with carbonatite-hosted deposits is poorly understood, and conflicting mechanisms of rare earth transport by anionic ligands and alkali behavior have been described. Here, we report quantitative data to characterize the role of carbonate-bearing solutions in the hydrothermal mobilization of neodymium. Solubility studies of neodymium phosphate were performed at temperatures ranging from 100 to 600 °C in carbonate-bearing solutions. The thermodynamic data determined for the predominant complex were used to model themore » separation of neodymium from thorium in a simple flow-through system based on fluid and mineral compositions characteristic of carbonatite deposits. Our data suggest that neodymium transport is controlled by the stability of the carbonate species NdCO₃OH^o , and at temperatures of 500–600 °C, the concentrations of neodymium in solutions can reach ~1000 ppm.« less

The Negev desert in Israel is home to large quantities of organic-rich, shallow marine sedimentary lithologies that could potentially accommodate the disposal of spent nuclear fuel. Previous thermal analyses of Negev carbonates have focused on industrially relevant considerations such as natural gas and oil extraction or pyrolysis for recovering hydrocarbon fuels. Here, this study addresses thermal evolution of the Negev organic-rich carbonate, siliceous, and phosphorite rocks and associated chemical, mineralogical, and microstructural changes that may occur under prolonged thermal loading in the vicinity of spent nuclear fuel disposal systems. Our employed methods include high-temperature X-ray diffraction, high-temperature infrared spectroscopy, andmore » thermal analysis integrating thermogravimetry, differential scanning calorimetry, and mass spectrometry. Further, we apply iterative iso-conversional model-free methods to derive kinetic parameters for thermal decomposition of the Negev organic-rich carbonate rocks from 200 to 550 °C. Our results have provided mechanistic insights into the thermal evolution encompassing water desorption, decomposition of organic matter, and decarbonation of carbonate phases.« less

In this work, we analyzed the effects of mineral scaling on the performance of a 3D interfacial solar evaporator, with a focus on the cations relevant to lithium recovery from brackish water. The field has been rapidly moving toward resource recovery applications from brines with higher cation concentrations. However, the potential complications caused by common minerals in these brines other than NaCl have been largely overlooked. Therefore, in this study, we thoroughly examined the effects of two common cations (calcium and magnesium) on the long-term solar evaporation performance of a 3D graphene oxide stalk. The 3D stalk can achieve anmore » evaporation flux as high as 17.8 kg m^–2 h^–1 under one-sun illumination, and accumulation of NaCl on the stalk surface has no impact. However, the presence of CaCl₂ and MgCl₂ significantly reduces the evaporative flux even in solutions lacking scale-forming anions. A close examination of scale formation during long-term evaporation experiments revealed that CaCl₂ and MgCl₂ tend to precipitate out within the stalk, thus blocking water transport through the stalk and significantly dropping the evaporation rates. These findings imply that research attention is needed to modify and optimize the internal water transport channels for 3D evaporators. Additionally, we emphasize the importance of testing realistic mixtures–including prominent divalent cations– and testing long-term operations in interfacial solar evaporation research and investigating approaches to mitigate the negative impacts of divalent cations.« less

Limestone (calcite, CaCO₃) is an abundant and cost-effective source of calcium oxide (CaO) for cement and lime production. However, the thermochemical decomposition of limestone (~800 °C, 1 bar) to produce lime (CaO) results in substantial carbon dioxide (CO_2(g)) emissions and energy use, i.e., ~1 tonne [t] of CO₂ and ~1.4 MWh per t of CaO produced. Here, we describe a new pathway to use CaCO₃ as a Ca source to make hydrated lime (portlandite, Ca(OH)₂) at ambient conditions (p, T) while nearly eliminating process CO_2(g) emissions (as low as 1.5 mol. % of the CO₂ in the precursor CaCO₃, equivalentmore » to 9 kg of CO_2(g) per t of Ca(OH)₂) within an aqueous flowelectrolysis/ pH-swing process that coproduces hydrogen (H_2(g)) and oxygen (O_2(g)). Because Ca(OH)₂ is a zero-carbon precursor for cement and lime production, this approach represents a significant advancement in the production of zero-carbon cement. The Zero CArbon Lime (ZeroCAL) process includes dissolution, separation/recovery, and electrolysis stages according to the following steps: (Step 1) chelator (e.g., ethylenediaminetetraacetic acid, EDTA)-promoted dissolution of CaCO₃ and complexation of Ca²⁺ under basic (>pH 9) conditions, (Step 2a) Ca enrichment and separation using nanofiltration (NF), which allows separation of the Ca-EDTA complex from the accompanying bicarbonate (HCO₃^–) species, (Step 2b) acidity-promoted decomplexation of Ca from EDTA, which allows near-complete chelator recovery and the formation of a Ca-enriched stream, and (Step 3) rapid precipitation of Ca(OH)₂ from the Ca-enriched stream using electrolytically produced alkalinity. These reactions can be conducted in a seawater matrix yielding coproducts including hydrochloric acid (HCl) and sodium bicarbonate (NaHCO₃), resulting from electrolysis and limestone dissolution, respectively. Careful analysis of the reaction stoichiometries and energy balances indicates that approximately 1.35 t of CaCO₃, 1.09 t of water, 0.79 t of sodium chloride (NaCl), and ~2 MWh of electrical energy are required to produce 1 t of Ca(OH)₂, with significant opportunity for process intensification. This approach has major implications for decarbonizing cement production within a paradigm that emphasizes the use of existing cement plants and electrification of industrial operations, while also creating approaches for alkalinity production that enable cost-effective and scalable CO₂ mineralization via Ca(OH)₂ carbonation.« less

TRP channels are implicated in various diseases, but high structural similarity between them makes selective pharmacological modulation challenging. Here, we study the molecular mechanism underlying specific inhibition of the TRPM7 channel, which is essential for cancer cell proliferation, by the anticancer agent CCT128930 (CCT). Using cryo-EM, functional analysis, and MD simulations, we show that CCT binds to a vanilloid-like (VL) site, stabilizing TRPM7 in the closed non-conducting state. Similar to other allosteric inhibitors of TRPM7, NS8593 and VER155008, binding of CCT is accompanied by displacement of a lipid that resides in the VL site in the apo condition. Moreover, wemore » demonstrate the principal role of several residues in the VL site enabling CCT to inhibit TRPM7 without impacting the homologous TRPM6 channel. Hence, our results uncover the central role of the VL site for the selective interaction of TRPM7 with small molecules that can be explored in future drug design.« less